English
Currency PHP
Explosion-proof electromagnetic lock ex-lock FM-26 (explosion-proof marking PB EX MB I MB X / 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X) PASHK.425729.156 TU – "MAGNITO-KONTAKT" Ltd | all.biz
ALL.BIZ Philippines Philippines products Security & Protection Security systems equipment Safety systems equipment Electronics safety equipment Explosion-proof electromagnetic lock ex-lock FM-26 (explosion-proof marking PB EX MB I MB X / 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X) PASHK.425729.156 TU
Buy Explosion-proof electromagnetic lock ex-lock FM-26 (explosion-proof marking PB EX MB I MB X / 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X) PASHK.425729.156 TU
Explosion-proof electromagnetic lock ex-lock FM-26 (explosion-proof marking PB EX MB I MB X / 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X) PASHK.425729.156 TU

Explosion-proof electromagnetic lock ex-lock FM-26 (explosion-proof marking PB EX MB I MB X / 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X) PASHK.425729.156 TU

In stock
Price:
22561.09 PHP
Wholesale:
  • 20510.08 PHP/pcs  - from 10 pcs
Payment:
  • Cash,
  • Invoice payment,
  • Cash on delivery
  • In detail
Shipping:
  • Customer pickup,
  • Courier,
  • Transport company
  • In detail
Seller
Russia, Rjazan
(View map)
+7(4 
Display phones
Less than 1 year old on Allbiz
Technical characteristics
  • BrandНПП «МАГНИТО-КОНТАКТ»
  • Country of manufactureRussia
Description

Passport

Declaration of conformity to the requirements of the Technical Regulations of the Customs Union "On the safety of low - voltage equipment" (TR CU 004/2011), the Technical Regulations of the Customs Union "Electromagnetic compatibility of technical means" (TR CU 020/2011) EAEU N RU D - RU. НР15.V. 08437/20 . Valid from 5.10.2020 to 4.10.2025

1. General information

Explosion - proof electromagnetic lock Ex - lock FM - 26 is intended for use in security systems of objects, in fire and security and fire alarm systems as a controlled locking device. Burglary resistance class U3 in accordance with GOST R 52582 - 2006.

Ex - lock FM - 26 is produced in the following modifications:

Ex - lock FM - 26 G with built - in magnetic contact position sensor (reed switch). Climatic version O1, operating conditions at temperatures from minus 60 ° С to plus 50 ° С and relative humidity 98% at 25 ° С.
Ex - lock FM - 26 N with a built - in lock control device based on a Hall sensor. Climatic version U1, operating conditions at temperatures from minus 40 ° С to plus 50 ° С and relative humidity 98% at 25 ° С.
Ex - lock FM - 26 without built - in control sensors. Climatic version O1, operating conditions at temperatures from minus 60 ° С to plus 50 ° С and relative humidity 98% at 25 ° С.

Explosion - proof electromagnetic lock Ex - lock FM - 26 in terms of explosion protection meets the requirements of TR CU 012/2011 "On safety of equipment for work in explosive atmospheres", GOST 31610.0 - 2014 (IEC 60079 - 0: 2011) "Explosive atmospheres. Part 0. Equipment. General requirements ", GOST R IEC 60079 - 18 - 2012" Explosive atmospheres. Part 18. Equipment with the type of protection "encapsulated with compound" m "and are marked with explosion protection PB Ex mb I Mb X and 1Ex mb IIC T5 Gb X and Ex mb IIIC T80 ° C Db X or 1Ex mb IIC T5 Gb X and Ex mb IIIC T80 ° C Db X. . . The “X” sign following the explosion - proof marking of the sensor means that the sensors are manufactured with a permanently connected cable and indicates the need for the appropriate connection of the free end of the cable, clause 14.1 of GOST 31610.0 - 2014 (IEC 60079 - 0: 2011).

Ex - lock FM - 26 is intended for use in hazardous areas in accordance with the established explosion protection marking, the requirements of TR CU 012/2011, GOST IEC 60079 - 14 - 2013 “Explosive atmospheres. Part 14. Design, selection and installation of electrical installations ", GOST 31438.2 - 2011 (EN 1127 - 2: 2002)" Explosive atmospheres. Explosion protection and explosion prevention. Part 2. Basic concept and methodology (for underground workings) "other regulatory documents governing the use of electrical equipment in explosive areas, including in underground workings of mines, mines and their surface structures, hazardous for firedamp and (or) combustible dust.

Explosion - proof electromagnetic lock Ex - lock FM - 26 with explosion protection marking PB Ex mb I Mb X and 1Ex mb IIC T5 Gb X and Ex mb IIIC T80 ° C Db X according to GOST 31610.0 2014 (IEC60079 - 0: 2011) is intended for use in underground workings of mines, mines and their surface structures, hazardous by firedamp and (or) combustible dust, as well as in explosive gas and dust areas of premises and outdoor installations.

Explosion - proof electromagnetic lock Ex - lock FM - 26 with explosion protection marking 1Ex mb IIC T5 Gb X and Ex mb IIIC T80 ° C Db X according to GOST 31610.0 2014 (IEC60079 - 0: 2011) is intended for use in explosive gas and dust areas of premises and installations, except for mines, mines and their surface structures, hazardous for firedamp and (or) combustible dust.

In terms of the method of protecting a person from electric shock, the lock corresponds to class "I" according to GOST IEC 60335 - 1. Sheath protection degree - IP66 / IP68 in accordance with GOST 14254 - 2015.

Ex - lock FM - 26 is supplied with the use of MKV cable glands with explosion protection marking 1Ex d IIС Gb / PB Ex d I Mb or Ex tb IIIС Db or 0Ex ia IIC Ga or 1Ex e IIС Gb .

Structure of the device symbol Ex - lock FM - 26

Ex - lock FM - 26 X1 X2 X3 X4
X1 - code of the used sensor:
G - reed switch,
H - Hall sensor,
without control sensor - no code
X2 - supply voltage code
( 12 - voltage 12V;
24 - voltage 24V)
X3 - cable entry code:
B - for armored cable,
K - for open cable laying,
T - for laying the cable in the pipe (T1 / 2),
M - for laying a cable in a metal hose (KM15)
X4 - designation of technical conditions

Examples of order:

1. Explosion - proof electromagnetic lock Ex - lock FM - 26 G 12V K PASHK.425729.156TU


Marking: PB Ex mb I Mb X and 1Ex mb IIC T5 Gb X and Ex mb IIIC T80 ° C Db X

 

With this type of order, the consumer will be delivered:


Explosion - proof electromagnetic lock Ex - lock FM - 26 with a built - in magnetic contact position sensor (reed switch), with a supply voltage of 12V, with an inlet for open cable routing of standard length and PB marking Ex mb I Mb X and 1Ex mb IIC T5 Gb X and Ex mb IIIC T80 ° C Db X.

 

2. Explosion - proof electromagnetic lock Ex - lock FM - 26 24V M PASHK.425729.156TU


Marking: 1Ex mb IIC T5 Gb X and Ex mb IIIC T80 ° C Db X. Cable length 20 m.

 

With this type of order, the consumer will be delivered:


Explosion - proof electromagnetic lock Ex - lock FM - 26 without control sensor, with a supply voltage of 24V, with an inlet for cable laying in a metal hose and marking 1Ex mb IIC T5 Gb X and Ex mb IIIC T80 ° C Db X. Cable length 20 meters.

 

2. Basic parameters and characteristics

Nominal supply voltage of Ex - lock FM - 26: 12 V or 24 V DC.
Permissible deviation of power supply from the nominal value + 15 / - 10% .
Design: with a permanently attached 2 m cable *
* at the customer's request, it is possible to supply the Ex - lock FM - 26 with a cable of a different length:
- no more than 35 m for a lock with a 12 V supply voltage
- no more than 140 m for a lock with a supply voltage of 24 V
Consumption current Inom in the operating temperature range:
- for 12 V supply voltage - no more than 0.7 A,
- for supply voltage 24 V - no more than 0.35 A
Усилие удержания якоря замка при номинальном напряжении питания в нормальных климатических условиях, не менее 350 кгс (класс устойчивости к взлому U3 по ГОСТ Р 52582 - 2006)
Остаточное намагничивание при отключении питания не более 0.5 кгс
Габаритные размеры корпуса, (ДхШхВ) мм 237 х 43 х 28 + 2
Габаритные размеры якорной части, (ДхШхВ) мм: 203 х 45 х 20 (с датчиком контроля), 187 х 45 х 20 (вариант «Н» и вариант без датчика контроля)
Масса комплекта поставки в базовой комплектации (не более), кг 7.5
Степень защиты оболочки по ГОСТ 14254 - 2015 (IEC60529: 2013) IP66/IP68
Ех - замок FM - 26 не содержит драгоценных металлов (п.1.2 ГОСТ 2.608 - 78)

Условия эксплуатации:

Температура эксплуатации: от минус 40°С до плюс 50°С (Ех - замок FM - 26 Н); от минус 60°С до плюс 50°С (Ех - замок FM - 26, Ех - замок FM - 26 G) при относительной влажности воздуха до 98% при температуре 25°С.

Электрические параметры устройства контроля замка представлены в таблице 2.

Таблица 2

ЭЛЕКТРИЧЕСКИЕ ПАРАМЕТРЫ ВАРИАНТ G (МАГНИТОКОНТАКТНЫЙ ДАТЧИК)
Максимальная коммутируемая мощность, Вт 10
Коммутируемый ток до 0.5 А
Коммутируемое напряжение до 100 В
Сопротивление замкнутых контактов, Ом, не более 0.2
Зона срабатывания датчика при смещении якоря вдоль рабочей поверхности корпуса 4х4 мм

3. Работа и обеспечение взрывозащищенности

3.1. Взрывозащищённость Ех - замок FM - 26 обеспечивается видом взрывозащиты (герметизации компаундом «m») заливкойв соответствии с требованиями ГОСТ Р МЭК 60079 - 18 - 2012.

3.2. The design of the Ex - lock FM - 26 is made taking into account the general requirements of GOST 31610.0 - 2014 (IEC60079 - 0: 2011) for electrical equipment located in hazardous areas using the following design solutions:


- sealing of electrical components by pouring a heat - resistant compound, ensuring the absence of air pockets, cracks and delamination
- protection of the filling sealant with a stainless steel cover
- the use of an all - metal milled body as a shell
- the use of a permanently connected cable in the design
- the use of Ex cable glands MKV, marked with explosion protection in accordance with the conditions of use and certified in accordance with the established procedure with sealing the threaded connection of the cable gland when it is installed in the shell with an anaerobic sealant.

 

3.3. The maximum heating temperature of the body surface of the Ex - lock FM - 26 does not exceed the permissible values for the temperature class T5 in accordance with GOST 31610.0 - 2014 (IEC 60079 - 0: 2011), taking into account the maximum ambient temperature.

3.4. The design of the lock provides a degree of protection not lower than IP66 / IP67 in accordance with GOST 14254 - 2015 (IEC60529: 2013).

3.5. Application as a protective device that prevents overheating of the device in the event of a malfunction of the built - in fuse with an operation time of no more than 1 s, short - circuit current Isc = 2.75A (for 12V), Ic = 1.4A (for 24V).

3.6. The sign "X" in the marking, indicating the need for the appropriate connection of the free end of the cable, clause 14.1 of GOST 31610.0 - 2014 (IEC 60079 - 0: 2011).

3.7. On the body of the electromagnetic lock there are the necessary warning labels, explosion protection markings.

4. Terms of use

4.1. Ex - lock FM - 26 refers to explosion - proof electrical equipment of groups I and II in accordance with GOST 31610.0 - 2014 (IEC 60079 - 0: 2011) and are intended for use in hazardous areas in accordance with the established explosion protection marking, the requirements of TR CU 012/2011, GOST IEC 60079 - 14 - 2013 “Explosive atmospheres. Part 14. Design, selection and installation of electrical installations ", GOST 31438.2 - 2011 (EN 1127 - 2: 2002)" Explosive atmospheres. Explosion protection and explosion prevention. Part 2. Basic concept and methodology (for underground workings) "other regulatory documents governing the use of electrical equipment in hazardous areas, including regulatory documents governing the use of electrical equipment in underground workings of mines, mines and their surface structures, hazardous for firedamp and ( or) combustible dust.

4.2. Possible explosive areas of application Ex - lock FM - 26, categories of explosive mixtures of gases and vapors with air - in accordance with the requirements of GOST IEC 60079 - 10 - 1 - 2011 "Explosive atmospheres. Part 10 - 1. Zone classification. Explosive gas atmospheres ", GOST R IEC 60079 - 20 - 1 - 2011" Explosive atmospheres. Part 20 - 1. Characteristics of substances for the classification of gas and vapor. Test methods and data ”, other normative documents regulating the use of electrical equipment in hazardous areas.

4.3. Maintenance of Ex - lock FM - 26 must be carried out in strict accordance with the requirements of GOST IEC 60079 - 17 - 2013 "Explosive atmospheres. Part 17. Inspection and maintenance of electrical installations ".

5. Safety requirements during operation

5.1. Do not use the lock if there is mechanical damage to the case, cable gland or outer sheath of the cable.

5.2. The lock must be grounded.

5.3. Do not use the lock if there is a layer of dust on the surface of the case over 5 mm.

5.4. It is forbidden to operate the lock when the case is heated above temperatures exceeding the permissible temperature class for an explosive gas atmosphere (T5) or with a maximum surface temperature of 80 ° C for an explosive dust atmosphere.

5.5. The castle contains no harmful chemical components and elements that create electromagnetic radiation of a dangerous level. Ex - lock FM - 26 does not contain precious metals (clause 1.2 of GOST 2.608 - 78).

6. Completeness

The delivery set of the Ex - lock FM - 26 includes:

Hull part:
building 1) 1 PC
strap (2) 1 PC
elbow (3) 1 PC
washer 6 (4) 2 pcs
bolt М6х16 (5) 2 pcs
elbow washer (6) 4 things
mounting plate (7) 1 PC
screw M6x16 secret. Stainless steel (8) 2 pcs
earthing screw M5 (9) 1 PC
washer 5 (brass) (10) 2 pcs
screw M6x10 fix. (stainless) (11) 2 pcs
Anchor part:
anchor (12) 1 PC
conical spring (13) 1 PC
anchor mounting plate (14) 1 PC
gasket under the armature mounting plate (15) 4 things
screw M6x16 secret. stainless steel (sixteen) 1 PC
Allen key S4 1 PC
diode 1N406 1 PC
varistor JVR - 14N470K (for 24V option) 1 PC
passport 1 PC
Contact the seller
Explosion-proof electromagnetic lock ex-lock FM-26 (explosion-proof marking PB EX MB I MB X / 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X) PASHK.425729.156 TU
Explosion-proof electromagnetic lock ex-lock FM-26 (explosion-proof marking PB EX MB I MB X / 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X 1EX MB IIC T5 GB X / EX MB IIIC T80 ° C DB X) PASHK.425729.156 TU
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Shipping method
Payment method
Compare0
ClearSelected items: 0