Aquashield Plus waterproofing compound
- Customer pickup,
- Courier
- In detail
ADVANTAGES:
- Excellent Bonding - Aquashield Plus is 100 compatible with any concrete surface. Once applied, it will be monolithic with the concrete substrate.
- Flexible - Hairline cracks can be easily bridged to maintain the integrity of the waterproofing barrier. No leaks to worry.
- Time Saving - Unlike bitumen or elastomeric type systems, there is no need to wait 28 days for full curing of concrete substrates before application of waterproofing.
- Easy Application - A brush will do the job.
- Economical - Technological advancements make cementitious waterproofing the most cost effective waterproofing today.
- Paintable - Acrylic or latex paints are compatible to give it the colored finish of your choice.
- Non-toxic - It can be used for potable water storage tanks like cisterns. Aquashield Plus is not harmful to wildlife in fishponds.
- Ready for Tile Installation - After application and flood testing, tiles can be layed directly on the Aquashield Plus with the use of ABC Tile Adhesive.
USES:
- For external and internal concrete surfaces where water, moisture or condensation is a problem.
- For crack sealing, repair works and for long term protection against seepages, leaks and water infiltration.
- For specific applications such as watertanks, firewalls, roofdecks, floor slabs above and below ground, CHB walls, concrete gutters and plant boxes, etc.
SURFACE PREPARATION:
Concrete surfaces must be free of form oil, dirt, dust and other contaminants which would affect adhesion of AQUASHIELD PLUS. Use a steel trowel to scrape off loose particles. Concrete must be structurally sound.
CAUTION: Use AQUAPLUG hydraulic cement to seal leaks and seepages before applying AQUASHIELD PLUS. Remove deteriorated plasters and make good with appropriate patching mortars. Consult your ABC technician or dealer.
MIXING:
Shake liquid (Component A) vigorously. Use a clean plastic or another non-absorptive container and add the powder (Component B) to the liquid (Component A), approx. 3 kg powder to 1L liquid. Mix to form a slurry consistency. Stir by hand or with a low speed mixer. Use within a pot life of 1 hour. NOTE: Do not add water to change the consistency of the mix.
PACKAGING:
4.5 kg SET and 36 kg SET. One set consists of COMPONENT A (Liquid Polymer) and COMPONENT B (Powder).
CLEANING:
Do not let material cure and harden on tools, mixing pail and equipment. Clean immediately with water after use.